The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing!

With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items.

Functionality of this connector:
This connector can be used to connect 16/10mm tubing with a 1/4“ thread.

Technical specifications:
Material: Brass, chromatized
Colour: Shiny Copper

Dimensions:
Width: 23mm
Height: 23mm
 
Hose size compatibility : 16/10mm

Extent of delivery:
1 x Alphacool HF Screw connector G1/4 outer thread on 16/10 - Shiny Copper

Mayhems new pastel range incorporates many different technologies into one product from dyes to nano fluids and of course a litlle Mayhems magic. With a system working life of about 2 years this fluid is designed to last a long time. 

Properties & Benefits

• Can be used with all of Mayhems Dyes to make your very own colours
• Child Safety Cap
• Removable spout
• Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards
• Very low oral toxicity, less than propylene glycol
• -8c freezing point
• Mobilises to prevent scale or sludge filming
• Boiling Point : up to 95° C (pressure dependent)
• Can be stored for up to 3 years in a cool dry environment
• Made in the UK 

Before Using Mayhems Pastel range

The system must be clean and have no chemicals of any kind left in the system. There must be no bleach, biocide and anti corrosive inhibitors. We recommend you flush your system with either DI water or Mayhems Ultra Pure H20 before use. Mayhems Pastel has biocides and inhibitors included in the mixture. 

Warning: Contains Zinc Oxide. Do not dispose of down the drain. This is harmful to the environment. Please dispose of in safe appropriate manner. Store in a cool dry place out of reach of children and animals.

If swallowed do NOT induce vomiting unless directed to do so by medical personnel.

The aforementioned “Aurora” range is based on our proprietary blend of refined vegetable extracts, which are fully biodegradable and have a very low order of oral toxicity. The bottle comes with a Child Safety Cap as well as a spout to enable the consumer to fill all manner of systems easily. This range of coolants is recommended for use in systems where an ‘environmentally friendly’ product is preferred. It also contains non-toxic (GRAS) multi-metal inhibitors, formulated to protect the water cooling equipment and associated systems against corrosion, scale and biological fouling. This prolongs equipment life and thermal efficiency. 

 Although every effort has been made to produce this product, there are no guarantees that this will work on all systems. Mayhems are not responsible if the aforementioned fails in the end-users system. Please read our 'Aurora Wiki' before purchasing

Properties & Benefits

Can be used with all of Mayhems Dyes to make your very own colours

• Child Safety Cap
• Removable spout
• Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards
• Very low oral toxicity, less than propylene glycol
• -35c freezing point
• Generally Recognised as Safe (GRAS) by the US Food & Drug Administration as a food additive
• Mobilisers to prevent scale or sludge filming
• Boiling Point : up to 100° C (pressure dependent)
• 85% Bio-degradable within 30 days
• Bitter taste additives to prevent consumption
• Can be stored for up to 3 years (if stored in a cool dry environment)
• Made in the UK 

Tested equipment

Mayhems Aurora Wiki Page - http://mayhems-aurora.wikispaces.com/

* Reservoirs with Inbuilt Pumps do not work well as the pump vents suck in the pearl and do not release it.

 ** Single DDC / D5 Reservoir has large opening on right hand side were the water is dead and does not move this causes the pearl to drop out of suspension and lay.

The best type of reservoir is a tube reservoir as the pearl cannot lay anywhere and is in constant movement. Bay reservoirs with good flow throughout the reservoir are also recommended. Injection moulded plastics may have a problem however this has not been confirmed.

 Before Using Mayhems “Aurora “

The system must be clean and have no chemicals of any kind left in the system. There must be no bleach, biocide and anti corrosive inhibitors. We recommend you flush your system with Either DI water or Mayhems Ultra Pure H20 Before use. Mayhems “Aurora” has biocides and inhibitors included in the mixture.

 DO NOT USE WITH INLINE FILTERS OF ANY TYPE. THESE WILL CAUSE THE SYSTEM TO BLOCK UP.

The aforementioned “Aurora” range is based on our proprietary blend of refined vegetable extracts, which are fully biodegradable and have a very low order of oral toxicity. The bottle comes with a Child Safety Cap as well as a spout to enable the consumer to fill all manner of systems easily. This range of coolants is recommended for use in systems where an ‘environmentally friendly’ product is preferred. It also contains non-toxic (GRAS) multi-metal inhibitors, formulated to protect the water cooling equipment and associated systems against corrosion, scale and biological fouling. This prolongs equipment life and thermal efficiency. 

 Although every effort has been made to produce this product, there are no guarantees that this will work on all systems. Mayhems are not responsible if the aforementioned fails in the end-users system. Please read our 'Aurora Wiki' before purchasing

Properties & Benefits

• Can be used with all of Mayhems Dyes to make your very own colours
• Child Safety Cap
• Removable spout
• Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards
• Very low oral toxicity, less than propylene glycol
• -35c freezing point
• Generally Recognised as Safe (GRAS) by the US Food & Drug Administration as a food additive
• Mobilisers to prevent scale or sludge filming
• Boiling Point : up to 100° C (pressure dependent)
• 85% Bio-degradable within 30 days
• Bitter taste additives to prevent consumption
• Can be stored for up to 3 years (if stored in a cool dry environment)
• Made in the UK

Tested equipment

Mayhems Aurora Wiki Page - http://mayhems-aurora.wikispaces.com/

Manufacturer

Part

Pass / Fail

XSPC

RASA

PASS

XSPC

Laing DDC 200ml Reservoir Pump Top

PASS

XSPC

RS240

PASS

XSPC

Single 5.25″ Bay Reservoir

PASS

XSPC

Dual 5.25″ Bay Reservoir

PASS

XSPC

Single Slot Pump & Reservoir combo

FAIL *

XSPC

X20 750 Pump & Reservoir combo

FAIL *

XSPC

Laing Dual Bay res (single Pump)

FAIL **

XSPC

Laing Dual Bay Res (duel DDC Pumps)

PASS

Phobya

DC12-400 12 Volt Pump

PASS

Phobya

DC12-800 12 Volt Pump

PASS

Phobya

Balancer 150 Black Nickel

PASS

Phobya

S.1366 / 1156 Water Block

PASS

Phobya

G-Changer 240

PASS

Koolance

CPU-370 (with small restriction plate)

PASS

Koolance

CPU-370 (restriction plate removed.)

PASS

Laing

DDC 10w

PASS

Laing

DDC 18W

PASS

Watercooling

Heat Killer (With restriction plate)

PASS

Watercooling

Heat Killer (Without restriction plate)

PASS

EK WB

Supreme LT AMD Acetal AMR3

PASS

EK WB

Supreme HF (restriction plate removed.) EN

PASS

EK WB

Supreme HF (with restriction plate) EN

PASS

EK WB

460 Old Plated GPU Block

PASS

* Reservoirs with Inbuilt Pumps do not work well as the pump vents suck in the pearl and do not release it.

 ** Single DDC / D5 Reservoir has large opening on right hand side were the water is dead and does not move this causes the pearl to drop out of suspension and lay.

The best type of reservoir is a tube reservoir as the pearl cannot lay anywhere and is in constant movement. Bay reservoirs with good flow throughout the reservoir are also recommended. Injection moulded plastics may have a problem however this has not been confirmed.

Before Using Mayhems “Aurora “

The system must be clean and have no chemicals of any kind left in the system. There must be no bleach, biocide and anti corrosive inhibitors. We recommend you flush your system with Either DI water or Mayhems Ultra Pure H20 Before use. Mayhems “Aurora” has biocides and inhibitors included in the mixture.

 DO NOT USE WITH INLINE FILTERS OF ANY TYPE. THESE WILL CAUSE THE SYSTEM TO BLOCK UP.

The aforementioned “Aurora” range is based on our proprietary blend of refined vegetable extracts, which are fully biodegradable and have a very low order of oral toxicity. The bottle comes with a Child Safety Cap as well as a spout to enable the consumer to fill all manner of systems easily. This range of coolants is recommended for use in systems where an ‘environmentally friendly’ product is preferred. It also contains non-toxic (GRAS) multi-metal inhibitors, formulated to protect the water cooling equipment and associated systems against corrosion, scale and biological fouling. This prolongs equipment life and thermal efficiency.  

Although every effort has been made to produce this product, there are no guarantees that this will work on all systems. Mayhems are not responsible if the aforementioned fails in the end-users system. Please read our 'Aurora Wiki' before purchasing

Properties & Benefits

• Can be used with all of Mayhems Dyes to make your very own colours
• Child Safety Cap
• Removable spout
• Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards
• Very low oral toxicity, less than propylene glycol
• -35c freezing point
• Generally Recognised as Safe (GRAS) by the US Food & Drug Administration as a food additive
• Mobilisers to prevent scale or sludge filming
• Boiling Point : up to 100° C (pressure dependent)
• 85% Bio-degradable within 30 days
• Bitter taste additives to prevent consumption
• Can be stored for up to 3 years (if stored in a cool dry environment) Made in the UK 

Tested equipment

Mayhems Aurora Wiki Page - http://mayhems-aurora.wikispaces.com/

* Reservoirs with Inbuilt Pumps do not work well as the pump vents suck in the pearl and do not release it.

 ** Single DDC / D5 Reservoir has large opening on right hand side were the water is dead and does not move this causes the pearl to drop out of suspension and lay.

The best type of reservoir is a tube reservoir as the pearl cannot lay anywhere and is in constant movement. Bay reservoirs with good flow throughout the reservoir are also recommended. Injection moulded plastics may have a problem however this has not been confirmed. 

Before Using Mayhems “Aurora “

The system must be clean and have no chemicals of any kind left in the system. There must be no bleach, biocide and anti corrosive inhibitors. We recommend you flush your system with Either DI water or Mayhems Ultra Pure H20 Before use. Mayhems “Aurora” has biocides and inhibitors included in the mixture. 

DO NOT USE WITH INLINE FILTERS OF ANY TYPE. THESE WILL CAUSE THE SYSTEM TO BLOCK UP.

XSPC Are renowed for bringing unique products to the water cooling market again they have done it with there tool free compression fittings no more damaged motherboards. These compression fitting are also ver low profile.

-Black Chrome Finish
- For 1/2″ ID, 3/4″ OD Tubing (12.7mm ID, 19mm OD)
- Low profile design
- G1/4″ Thread

Easy tool free coin installation

-Chrome Finish
- For 1/2″ ID, 3/4″ OD Tubing (12.7mm ID, 19mm OD)
- Low profile design
- G1/4″ Thread

Easy tool free coin installation

The connection threads are G1/4" in size and therefore offer maximum compatibility with virtually all available fittings.

Technical details:
Material: Copper fins, brass chambers, Aluminium side mounts
Dimensions: 273x122x45mm
Connection threads: G1/4"
Weight: Approx. 1147g
Fan installation: 8x M3 threads each on both sides
Pressure tested: 8bar

Important: Please flush before use and insert a screw into all M3 threads. Please be careful that the screws used are not too log, this may damage the radiator ans is not covered by the warranty.

Warranty: On impermeability and manufacturing for 2 years

Actual product similar to picture

Six heatpipe dual radiator design
Providing more surface area, better heat-distribution and superior airflow efficiency than conventional tower style heatsinks, the NH-D14s six heatpipe dual radiator design was developed to provide ultimate quiet cooling performance in dual fan mode.

Dual NF-P14/NF-P12 fan setup
The NH-D14 sports a premium quality dual fan setup consisting of Noctua's award-winning NF-P12 (120mm) and NF-P14 (140mm) fans, both of which feature Vortex-Control Notches, SCD technology and SSO-Bearings in order to achieve a perfect balance of performance and quietness.

Asymmetrical design for high compatibility
An asymmetrical design that gives more clearance towards the RAM slots ensures good compatibility despite of the coolers size. The NF-P12 fan can be moved upwards or left off in order to further improve compatibility.

Excellent component cooling
Hanging out at the bottom of the fin-stacks, the NF-P14 fan doesn't only contribute to the NH-D14s superb CPU cooling capabilities but also provides massive airflow over surrounding motherboard components and heatsinks, thus ensuring excellent component cooling performance.

SecuFirm2 multi-socket mounting system
Noctua's enthusiast grade SecuFirm2 multi-socket mounting provides broad socket compatibility (LGA1366, LGA1156, LGA775, AM2, AM2+ and AM3) and meets the highest demands in safety, contact pressure and ease-of-use.

NT-H1 thermal compound
Noctua's much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability.

• Fan Bearing SSO-Bearing
• Fan Rotational Speed (+/- 10%) 1200 / 1300 RPM
• Fan Rotational Speed with U.L.N.A. (+/- 10%) 900 / 900 RPM
• Fan Airflow 64.9 / 54.3 CFM
• Fan Airflow with U.L.N.A. 52.2 / 37.3 CFM
• Fan Acoustical Noise 19.6 / 19.8 dB(A)
• Fan Acoustical Noise with U.L.N.A. 13.2 / 12.6 dB(A)
• Fan Input Power 1.2 / 1.08 W
• Fan Voltage Range 12 V
• Fan MTBF > 150.000 h